The Garvee pop-up pavilion creates a covered space for garden parties, camping trips, and relaxing outdoors together. With a nominal roof area of approximately 396 × 396 cm, it provides ample room for a matching seating set.
Four detachable, zippered mesh walls enclose the interior, while the foldable design allows for easy collapse and storage between uses.
The square roof canopy spans a unified area suitable for seating and garden furniture.
The surrounding mosquito-net walls feature zippers and can be attached or removed depending on your needs.
The coated steel frame can be collapsed after use, allowing for space-saving storage until it is needed again.
The nominal roof area measures approximately 396 × 396 cm, providing a covered space for a seating set, a garden table, or a shared outdoor gathering area.
When planning the installation site, consider not only the product dimensions but also additional clearance for access, anchoring, and the safe operation of the mesh walls.
Four mesh walls enclose the space without completely sealing it off with opaque side panels. Zippered openings allow for entry and exit without the need to remove an entire side wall.
For a more open-air experience, the mesh walls can be removed, allowing the pavilion to be adapted for garden gatherings, camping trips, or changing weather conditions.
The coated steel frame supports the pavilion roof and the four mesh walls. Its foldable construction is designed for temporary setup and allows for easy collapse after use.
During assembly, pull the frame elements apart evenly and check all designated connections and locking mechanisms. Ensure the unit is anchored appropriately for the specific ground surface.
The roof cover features a silver-colored PU inner coating and serves as the top canopy for the pavilion, providing a shaded area for garden furniture and outdoor socializing.
The roof should be attached evenly to the frame, following the provided instructions. After rain—and before storing the unit—ensure the cover is completely dry to prevent moisture from being trapped inside.
The frame structure can be collapsed after use and stored away until needed again. This makes it perfect for seasonal or occasional use in the garden, at a campsite, or during events.
Before collapsing the unit, ensure the roof and mesh walls are clean and dry. Any detached components can be stored together with the folded frame.
| Brand | Garvee |
| Product type | Pop-up pavilion with mesh walls |
| Nominal roof dimensions (W × D) | Approx. 396 × 396 cm |
| form | Square |
| Frame material | Coated steel |
| Roof | Fabric with a silver-colored PU inner coating |
| mesh walls | 4, detachable and featuring zippers |
| construction | Foldable |
| Colour | Red/light gray |
| Suitable rooms | Garden, camping, and temporary events |
Note: The dimensions of approx. 396 × 396 cm refer to the nominal roof area. Additional space may be required for the support legs, access, and anchoring. The gazebo is intended for temporary use and must be secured appropriately for the specific ground surface. It should be taken down during high winds, storms, or other extreme weather conditions.
Featuring a roof area of approximately 396 × 396 cm, four detachable mesh walls, and a foldable steel frame, the Garvee pavilion provides a versatile space for garden parties, camping trips, and seasonal events.