The Garvee 2-piece set of scissor stabilizers is designed for the additional stabilization of suitable caravans and motorhomes at their pitches. Two separate stabilizers can be inserted into designated positions and adjusted independently of each other.
Each scissor support offers an adjustment range of approximately 10 to 61 cm and has a load capacity of up to 3,402 kg. The steel construction is complemented by a wide, profiled base plate, a crank, and a square drive.
Each individual scissor support is designed for a specified load capacity of up to 3.402 kg.
The height can be adjusted to different distances between the vehicle and the ground.
Two separate scissor supports allow for additional support at two suitable vehicle positions.
The scissor mechanism allows for a height range of approximately 10 to 61 cm.
This allows each support to be adjusted to the respective distance between the intended support point of the vehicle and the ground.
The two scissor supports can be adjusted independently to the required height.
This allows for adjustment to different ground clearances at the two intended support positions.
Each individual scissor support has a load-bearing capacity of up to 3.402 kg.
The load rating applies per support and is not presented as the added total load-bearing capacity of the set of two.
The supporting frame is made of steel and forms the basis of the scissor mechanism.
The profiled construction connects the movable support elements to the upper support and the lower base plate.
Each support has a wide base plate with a profiled surface.
The larger contact area distributes the contact with the ground over a wider area and supports positioning on a suitable surface.
The scissor supports can be adjusted manually using the provided crank.
By operating the mechanism, the respective support can be extended or lowered until the required height is reached.
In addition to the manual crank, a square taper drive is available.
This means that the scissor mechanism can alternatively be operated with a suitable tool.
The design features a locking mechanism to fix the set position.
This allows the selected support height to be maintained during the intended stabilization.
The steel structure has a powder-coated surface.
The coating complements the steel frame for its intended use around caravans, motorhomes and campsites.
The adjustment range of 10 to 61 cm allows adaptation to different distances between the vehicle and the ground.
The supports are therefore suitable for corresponding camping, pitch and parking applications, provided that suitable support points and a sufficiently load-bearing surface are available.
The set is designed for the additional stabilization of suitable caravans and motorhomes when parked.
The two supports can be placed in designated positions and each adjusted separately to the required height.
The minimum height of the scissor support is approximately 10 cm.
When retracted, the scissor mechanism requires less space than when fully extended, allowing for more compact storage.
| Brand | Garvee |
| Product type | Scissor support |
| Set contents | 2er-Set |
| Load-bearing capacity per support | up to 3.402 kg |
| Adjustment range | approx. 10–61 cm |
| material | Steel |
| operation | Crank and square drive |
| base plate | Wide and profiled |
| surface | Powder-coated |
| scope | Caravans and suitable motorhomes |
The Garvee 2-piece set of scissor stabilizers combines a load capacity of up to 3,402 kg per stabilizer with an adjustment range of approximately 10 to 61 cm, a steel construction, wide base plates, and both crank and square drive. The two separately adjustable stabilizers provide additional support for suitable caravans and motorhomes in the designated positions.